imdmyself.com landscape design in harmony with nature

DIY swing for children: 80 photos of the best options for simple and high-quality swings

For many years, children's swings do not lose their popularity. In the modern world, with the advent of various gadgets, children spend more and more time at home. Therefore, if the yard or cottage is equipped with modern attractions, swings - this is another reason to spend time in the fresh air.

Children's swings perform a number of important functions aimed at the development of the child:

  • brighten up free time;
  • temper the vestibular apparatus;
  • develop coordination of body movements;
  • give positive emotions due to the release of adrenaline;
  • reduce stress during smooth wiggles.

If there is no way to buy a swing in the store or if you have worries about the baby’s safety, then you can make them yourself. This will save money and come up with an individual design. According to the photos and drawings of children's swings, the advice of masters on the Internet, you can make a strong and reliable design.

Some parents, wanting to make a swing for their child, use improvised materials - car tires, plastic pipes, ropes and more.

However, in order to make them correctly, first you need to:

  • choose the type of design;
  • execute the drawing;
  • purchase materials;
  • prepare the necessary tools.

Swing from metal pipes

If there was an idea to make suspended children's swings, you must first dig a shallow pit for bearing supports. For this work, you can use a shovel or a manual drill. If the frame for the swing is metal, then before you put the pole in the pit, its bottom must be lubricated with substances that prevent the formation of metal corrosion.

At the bottom of the pit, pour crushed stone and sand and bury the support posts, and pour concrete on top. After mounting the support poles, it is necessary to weld the transverse crossbar on top of them to which the seat will be attached. In the center of it you need to fix the bearings.

The seat can be attached by welding metal pipes, hung on a chain or fixed on a rope. Seat - wooden boards, old chairs and other appliances.

Tire swing

When constructing a swing at a summer cottage, it is necessary to show imagination, especially if the plot is planted with trees. After all, it is a thick strong tree branch that can be used instead of a structure from a p-shaped frame. To it on a chain or a rope you can fix the seat in the form of a car tire.

To fix it, you must first prepare the tire. To do this, we apply a marking in the form of a rectangle on it, cut out this piece of rubber, turn the tire off with the tread inward and attach a chain or rope to it.

A car tire gives a huge scope to creativity, you can cut a horse out of a child, a bike, or fasten it like a bungee. Thus, you can get the simplest model of a children's swing for a summer residence, which does not require special efforts.


Swing in the room - how to fix it correctly

Suspended swings are in great demand than ordinary floor swings, since making them much easier. In order to make a swing in the room, you will need the following: a strong rope, hooks screwed into the wall, a seat and improvised tools.

It is important to understand that when installing a swing in a room, not every design will do.And it is important that the weight that they can support is limited, especially if the children's swing for the house will be fixed in the area of ​​the doorway.

We hook the hooks to the top of the opening, secure the seat with ropes and put on the hooks.

Balance swing - construction technology

In addition to hanging, among the street swings on the site are very popular ground. Which are also easy to do on their own. Consider a typical scheme for installing a balancer, which is easiest to execute them from a tree.

The devices used are as follows: wooden beams, logs, boards, woodworking products and paint or varnish. First, a lower frame of about one meter in length is constructed. Then, with the help of self-tapping screws, support supports are mounted at an angle or struts.

After that, along the entire length of the balancing board, 2-3 meters long, two beams are installed in parallel, and between them smaller beams are fixed - about one meter.


This design is mounted with screws or glue for carpentry. At the edges of the balancer seats and handles are made. And in the middle a hole is drilled to fix it to the base.

Swing for the smallest

At the playground for children should be present devices that would correspond to different ages of children. Swing-pendulum is in demand among kids. Making a spring swing for a playground yourself is simple. You will need car springs.

The base can be used to select a reinforcing crosspiece to which a metal anchor is attached by welding. First, a pit is also excavated, the base for the installation of a metal structure is prepared. Then, as in previous versions, all this is poured with concrete.

A seat is attached to the spring, which can be done based on the imagination of the master. For a girl from the boards you can make a horse, for a boy - a motorcycle or a car.

The best choice for a children's slide

When starting to design a slide, it is important to consider that the height of the slide should be half its length. And at the exit from the vertical section, it is necessary to equip a flat braking area.

It is also important to make a railing and a fence. This will protect the child from a possible fall and contributes to the ascent to the hill itself.

And from what the vertical exit will be made - metal or plastic, choose the master. If a tree is chosen as the material of a children's slide for a private house, then several wooden beams and boards will be needed.


Integrated playground arrangement

To create it, you will need the same skills as when creating the slide. It is only worth considering how its main elements will be located in relation to each other - horizontal bar, slide, ropes and so on. First, you should mount the slide, then gradually attach the remaining parts to it.

We prepare supports, install and concrete them. Then, using self-tapping screws, we mount the remaining transverse and longitudinal bearing beams to them. And to them we already attach swings, fences, railings and more.

It is important not to forget to take into account that the children's game complex fits into the boundaries of the designated area. Therefore, it is desirable to first carry out the drawings.

You can create this complex on a specific topic, depending on the imagination. Make a fabulous house or a ship with a descent down in the form of slides and ropes.

DIY children's swing photo

How to remove a stump with your own hands? Simple instructions with photos and tips

Woodpile: 75 photos how to make a beautiful and stylish building

Flowerbeds made of bricks: 115 photos of ideas for decorating flowerbeds with bricks

Pergolas made of wood: 140 photos and a detailed description of the garden building


Join the discussion:

1 Comment Chain
0 Chain Answers
0 Followers
 
Most popular comment
Topical Comment Chain
1 Comment authors
Subscribe
Notification of
Maria

Wow, how beautifully do the playgrounds. I would love to play there myself)) But seriously, thanks for the ideas. I will show my husband, let him think how to make a playground for our kids.