Drinking bowl for chickens - instructions for how to do it yourself. 85 photos implementing simple ideas
Agriculture today attracts a lot of enthusiasts. The prospect of eating green foods is tempting, and personal compound can be a good way to make money. Home products are in good demand and have an advantage over the store.
However, the organization of your own poultry yard or farm requires reflection, calculation of forces and some material investments. In the arrangement of the chicken coop or any other premises for keeping birds, it is necessary to provide, in addition to feed, access to fresh water. Without its sufficient volume, food is poorly absorbed, and metabolic products are worse excreted from the body. Most of all, young individuals need water.
To meet the needs of birds in liquids, various drinkers are used, which they can do with their own hands. In more detail and clearly consider the designs and features can be in the photo of drinking bowls for chickens.
Recommendations for use
The average daily measure of fluid required for one bird is 0.5 liters. But the volume may vary, depending on the temperature and the amount of feed consumed. Drinking from improvised materials, or spending a small amount of money to supplement the system, is not difficult at all.
Each owner of a suburban area dreams of making it unique and inimitable, filling it with original ideas, investing his dreams, knowledge and his talents. A lot of crafts can be made for the garden from unnecessary material, for example, from ordinary snags. My husband is fond of driftwood, he constantly cuts something out of them, mainly vases or figures, we have his crusts everywhere in the house, like these, for example.
Before making a drinker, the following points should be taken into account:
Reliability. An important requirement is to make a stable design so that the chickens do not overturn it. Otherwise, the birds will lose water, and dampness will be indicated in the house. And excess moisture carries a risk for the disease, especially young animals.
Practicality. For ease of use, it is worth considering an easy option for changing the water. Optimum - a connection to the water supply or another plan for automatic filling.
Security. During the construction of drinking bowls, it is better to give preference to plastic materials rather than metal. This is due to a change in the characteristics of drugs when interacting with metal particles, in the event that chickens will be given any medications.
Also, in order to avoid injury to animals with sharp edges and ledges of drinking bowls, it is necessary to handle the sides well.
Water quality. In order to preserve clean drinking water, it matters how much it is isolated from external factors: pollution by chicken droppings, other garbage. Therefore, the advantage in closed drinking bowls is obvious.
It is also worth considering a method of heating water in the cold season, for example, installing heating elements under the tank.
Cup drinkers
A simplified version, which is a bowl or bowl. They are placed at a reachable for birds. The drinker requires a frequent change of water and can easily roll over. Suitable for temporary use only.
An improved open-type model - a drinking bowl from a sewer pipe with a diameter of 10-15 cm. Using a grinder or other convenient tool in the pipe, make rectangular holes of 25-30 cm so that the start and end are 10-20 cm from the edge.
The distance between the holes should be 10 to 20 cm, respectively. Facets are stripping. At the edges put stubs. When filling or draining, the necessary plugs are eliminated.
In the chicken coop, the structure is fixed with clamps that are suitable in diameter with the pipe, and the pipe itself is fixed 15-20 cm above the floor level with a slope of 1-2 degrees. This will provide an opportunity to flush the pipe, and the drain will be carried out by gravity.
Such plastic drinkers are stable, they can be connected to a water supply system or tank. But the water in the building will quickly lose its freshness, and the drinker itself is suitable only for adults.
Nipple drinkers
A popular model among poultry farmers, due to the fact that the water in nipple drinkers can be kept fresh for a long time due to its design. Suitable for birds of any age.
To design a drinking bowl, you need 1800 nipples (for chickens) and 3600 (for adults), drop catchers, a PVC pipe, and a tank for standing water. After completing the marking, drill holes for each nipple separately, as well as a droplet eliminator. The latter can be done independently from plastic bottles, or purchased in a store. The distance between the nipples should be about 30 cm.
Then they perform the thread and screw the nipples wrapped with fum tape. At the end of the pipe, a plug is placed on one side, and on the other, it is attached to the tank at a distance of 5-10 cm.
There is a lightweight version of the nipple drinker, which looks like this: take a capacity of 10-30 liters and nipples in the amount of 4-5 pieces. Holes are drilled in the bottom and the nipples are screwed in. The container is hung at the optimum height for the birds. This nipple drinker allows you to economically consume water, is reliable and easy to keep clean.
Vacuum drinkers
In a model of this type, it will be necessary to monitor the state of water and change it more often than in a nipple one. For the device, you need to take any container, it can be an ordinary can of 1-1.5 liters, fill it with clean water to the brim, cover with a saucer and turn over.
You can also put special whetstones on a saucer, a lid or a special stand. The principle of operation of this design is due to the pressure that does not allow water to pour out.
You can also use a plastic bucket with a lid as a drinking bowl, and you also need a pallet that is larger than the bucket in area. Holes are drilled in the lid, the bucket is filled with fresh water and tilted upside down on a pallet. During use, the pan is systematically filled with water. Drinking bowls for chickens most often make a vacuum look.
Other drinker variations
Basically, drip drinkers are used to provide young animals with water: nipple or vacuum. The main condition is to prevent accidents, so that the chickens could not choke, or drown in a deep vessel.
Drinking bowls are securely fixed in order to avoid the risk of overturning, because, as they grow up, chickens become more active and the risk of tipping over increases.
Hose waterer
A simple option for making a drinking bowl can be done with a garden hose.Part of the hose is bent in the form of droplets and attached to one end of the water supply system, and the other is hung at a comfortable height for chickens.
This device is suitable for single use per day, for example, in the morning, because the water consumption is very noticeable.
Drinking bowls from plastic bottles
You can resort to the manufacture of drinking bowls to elementary materials, which are at hand. So you can make drinkers from plastic bottles. They are not as stable as glass vacuum ones, but their privilege is safe for birds.
Scheme of execution: take bottles of 5 liters. and 2.5 liters. First, cut off parts of a 5-liter, leaving only ¼ for further installation. In a 2.5-liter, holes are made at a distance from the neck of 7-8 cm and inserted into a 5-liter. Take caps from both bottles and put a smaller one into a larger one, securing it with screws. Then the container is filled with water and twisted.
Cooler Bottle Drinkers
Another way is to take 2 bottles for the cooler and 2 plastic buckets in which they could fit. And, given the level of filling with water, make holes so that hens can subsequently freely stick their heads through. The dispenser is made of pipe parts.
The neck of the bottles is inserted into the pipe, a zigzag edge is made, all details are compared, filling with clean water. The container itself is turned over in a bucket, and water thereby fills it. The volume of liquid in such a drinker makes it possible to quench thirst for a considerable number of birds over a long period.
Heated drinking bowl
In winter, it is important to build a heated drinking bowl. For this, a wooden base is made, into which a lamp is placed. The heating is due to the heat given off by the device and the water does not freeze.
The device of watering systems is diverse. It can be simple or original drinking bowls, improved and convenient for a particular chicken coop.
An example of an original and designer way of execution can be a drinker like a burdock leaf. To do this, put a burdock on a small pile of sand. Then pre-mixed concrete is poured on top so that the layer in the center is more dense and thin at the edges of the sheet.
After the concrete has dried, the burdock sheet is carefully removed. The resulting bowl of concrete has a vein pattern of burdock, which can additionally be painted in any color. Such a drinker will bring originality and embellish the landscape.
Photo of drinking bowls for chickens
Do-it-yourself chicken coop: 95 photos of construction and insulation options
Lianas for the garden: 125 photos of the most unpretentious and beautiful climbing plants
Join the discussion:
Hello everybody. I am an amateur farmer. I have my own little chicken coop. And faced with such a problem, it is inconvenient to pour water just into some kind of cup. Firstly, constant dirt. Secondly, constantly shed. I thought about how to do it all civilly. I read your article, it helped a lot. I made the simplest drinker, but now the chicken is not in the mud and it all looks beautiful. The most important thing is that the chicken is satisfied))))
A lot of useful information. We are going to start a chickens in the country, we are preparing everything. I didn’t want to buy ordinary drinkers, because they are often of poor quality, and the constructions are uncomfortable - they will climb their paws and get dirty water. And here you can do it yourself - both cheaper and responsible for the quality! Take it and use it.
In short, I picked up a couple of interesting ideas here, I will implement!
I found a large number of diverse ceilings on this site, from simple to complex, intricate ideas. My mother always did this: pour water into a jar, put a plate or dish on top, turn the whole thing over, and that's it. I saw something similar on the site, I remembered about this long-standing thumping, though it is not suitable for adult birds, they can turn over such a structure.
Hello everyone, I live in my house, but I never had a farm, the last owner of the house kept a hen in a flock. The ceiling in a low flock is still possible to clean chickens, but licking water is not convenient at all. It was done in the simplest way, on the floor I put a basin in the flock, and made a hole in the wall so that it was convenient to add water, I conducted a hose like a funnel. It turned out to be very convenient for the chickens to add water.
How many cool ideas are presented on the site. My husband used to keep the household, but here I am a kettle in this matter, we often get out to the city for a day or two, we have to ask friends to pour water and feed. They wanted to go buy special chicken feeders already. But still they decided to do it themselves, not so it turned out to be difficult. By the way, I didn’t even know that it was not advisable to put metal feeders.
The option with a plastic bucket is very convenient, but I would simplify it - I drilled holes closer to the bottom - so as not to turn over onto the lid. I myself use 5-liter plastic bottles. It is convenient to fill them with water, it is convenient to carry them in an empty state, and chickens cannot overturn them. And most importantly - the availability of empty containers, you can at least ten drinkers on the site to arrange.
In childhood, the rocker simply stood and everything was in order, the chickens did not dry out in the mouth) And now I also decided to get them and conceived a drinker for them to stir up more cunningly, but more interestingly. In general, thanks for the article and the pictures in particular, they threw up some good ideas 😉 All that is left is to get to the store, get ready for it and it's almost done)
my dad inherited a house in the village. Naturally, he caught fire to figure out his farm there with a garden and a belly - hens, pigs, etc. Climbing over the Internet looking for life hacks)) showed him this page - he was delighted with so many ideas. And in our childhood, I remember, everything that hens could count on was only an iron bowl, in which some small worms periodically started up ..