imdmyself.com landscape design in harmony with nature

Entrance doors to the house - which ones to choose? Review of the best models of 2019, design examples + 120 photos

The front door to a private house must be reliable and have good thermal insulation properties. An impressive variety of doors are available on the market, so choosing the right one can be a problem. There are some subtleties that you should know if you decide to independently purchase a street door. The latter can be made of wood, metal or PVC in combination with metal. Let's consider each option in more detail.

Wooden doors

If you install wooden entrance doors for the house, then later you can encounter a number of minuses. The door surface needs regular restoration of a protective layer of varnish or paint. In addition, wood is a fire hazardous material. The price of the doors is very high. However, the appearance of the product is distinguished by sophistication, the material itself is environmentally friendly.

Only high-quality materials and proper handling will help protect against hacking. Excellent properties are considered to be red wood, maple or oak. Soft in processing and economical will be pine. To strengthen the door structure, it is necessary to use metal profiles, for example, from aluminum.


Metal doors

The strength of a metal door directly depends on the thickness of the steel used for its manufacture. As a rule, running options are made of metal with a thickness of 1.2 to 2 mm. Doors are equipped with special stiffeners.

Several types of stiffeners can be distinguished: transverse, longitudinal and combined. The longitudinal reinforcement protects the front door from such a way of breaking in when the angle is bent. Cross ribs will resist indentation of the door surface. The combined version combines the advantages of the previous ones.

The highest strength can be achieved by booking the door leaf. In the manufacture of such doors, the technology for the production of safes with a bulletproof surface is used.

In addition, it makes sense to use some means of protecting the door structure: install reinforced hinges.

Insulated doors for the home to avoid the formation of frost or frost at low temperatures. Since the metal has a high thermal conductivity, the room can lose up to 25% of heat. Mineral wool is used, in some cases corrugated cardboard, as well as extruded polystyrene foam.


The special door decoration allows you to cope with the aggressive effects of natural factors in the form of direct sunlight, rain, snow, temperature changes. Therefore, the use of chipboard or MDF does not make sense, over time, even a coating of polyvinyl chloride will not be able to provide adequate protection.

Paint with a hammer effect is considered the best protection when the treated metal surface resembles chasing, hammering the metal. The pigments and silicone resin in the composition provide excellent moisture protection. The treated surface easily repels dirt, so the door leaf does not require special care.

In addition, the paint-coated doors look spectacular, and the color retains its saturation for quite some time. You can apply paint using a roller or spray gun, and this procedure is done several times. Multi-layer coating is the key to quality products.

It is possible to use specially processed ship panels made of solid oak, pine or alder. This coating gives the doors a chic look, but its cost is high. High quality wood is treated with a special waterproof glue.Panels of appropriate sizes are made from it.

When choosing a door, it is important to know which lock mechanism is used. Most of the heat in the room is lost precisely due to door locks. The best are metal entrance doors to the house, equipped with two types of locks at the same time - level lock and cylinder. The level lock is almost impossible to break, it is extremely difficult to pick a master key to the cylinder.

All mechanisms in terms of protection are divided into several classes. If this is the front door, then the best option will be 3 and 4 protection class. To find out what class of lock is used for a particular door, you need to refer to the product passport.

The combination of metal and plastic

Doors of this type have sufficient strength, have a long service life, are reliable and easy to maintain. There is no doubt that the steel door is characterized by higher rates, but it is worth remembering that the front door is not the only place from where attackers can enter the house.

Today, PVC doors are very widely used in the construction of low-rise buildings. The advantage of such doors is not subject to icing and condensation.

The manufacture of plastic entrance doors resembles the manufacture of plastic windows. But in general, technologies are different. Since high requirements are always set for door structures, a special reinforced PVC profile is used in production.

A high-quality door block should be made of a five-chamber profile with a thickness of at least 70 mm. The metal frame significantly enhances the entire structure. The rigidity of the frame is ensured by strong corner mounts. The high-strength frame allows the installation of powerful hinges and anti-burglary locks. Thermal and waterproofing is provided by a rubber seal, which is located on four sides of the frame and door leaf.


In the photo of the entrance doors to the house of this type, you can see the whole variety of finishing options, as well as inserts of triplex or armored glass. You can find doors with stained and tinted windows.

When choosing a door, pay attention to the area of ​​the glazing. A model will be considered reliable, the glazing surface of which does not exceed one third of the entire product. The top of the door slides beneath the glass to make the view better.

Single-leaf and double-leaf models are distinguished by the number of wings. The latter are used when the width of the opening is impressive and requires uniform distribution of the load of the canvas on the loop. A feature of metal-plastic doors is also that among them you can find arched and round options.

When choosing a model for your own home in the catalog of the best doors, you need to pay special attention to the handle. It is important that in addition to its attractive appearance, it should be made of durable material.

Before deciding on a specific model, it is worth asking about the material of the pens. If silumin is used, then it is better not to purchase such a door, since it is a light and low-strength alloy. Extruded aluminum handles burst quickly.

It is also important to pay attention to the number of loops. The door itself is quite heavy (sometimes the weight reaches 70 kg), so it should be hung at least three hinges.

The question of which doors to choose for the house necessarily arises at a certain stage of construction. There are many nuances of choosing the front door, but you won’t be able to give general correct advice.

Consider your own preferences, as well as a number of important factors, which were discussed above. Then the acquired front door will last a long time and will not require special time expenses for its maintenance.


Photo of the entrance door to the house


Orchid flower: planting, reproduction, dressing and care. Instructions + 90 photos of beautiful orchids

Shrubs for gardening: flowering and multifunctional options (75 photos)

Land styles: 130 photos of the main species and their modern features

Beautiful lawn on the site - 100 photos of ideas on how to plant and grow turf correctly


Join the discussion:

Subscribe
Notification of